ENGLISH
4
ing. Use a damp cloth for cleaning. Do not use
liquid cleaners or aerosol cleaners.
Cleaning discs
Do not use cracked or deformed discs, it can
damage the unit.
Hold the disc by the edges. Do not touch the sur-
face.
Dust, scratches or fingerprints on the surface
may lead to a failure of the unit.
Protect the disc from direct sunlight; heat sourc-
es, high temperature and moisture.
After usage, put the discs in the case for storage.
Wipe the surface of the discs with a soft cloth
from the center to the edges periodically.
Before operation
Unpack the unit. Press the OPEN/CLOSE button
and eject the protective insert before using the
unit.
Remove all advertising labels and stickers, which
prevent the unit from normal operation, from the
upper and front parts of the unit.
DESCRIPTION OF THE UNIT
1. VOLUME
control handle
2. AUX IN jack for outward device plugging
3. Earphones
jack
4. FUNCTION
(MP3(AUX)/OFF/RADIO)
SWITCH
5. OPEN/CLOSE deepening for disk bay open-
ing
6. BAND
(FM ST. /FM/AM) switch
7. USB – jack
8. FM
–antenna
9. TUNING
frequency knob
10. Battery compartment lid
11. Power jack
12.
PLAY/PAUSE/USB
button
13. STOP
■
button
14. FM ST. indicator
15. BASS indicator
16. LCD-display
17. Infrared sensor for remote control
18.
button for switching to the previous track
19. PROG
button
20. BASS
button
21. REP/RAN
button
22.
button for switching to the next track
Remote control
23. PROGRAM
button for playback program-
ming
24. -10/FOL-
button for switching for 10 tracks
back or to the previous folder
25. +10/FOL+
button for switching for 10 tracks
forward or to the next folder
26.
PLAY/PAUSE
/
USB
button
27.
/
button for switching to the previous
track and search
28.
/
button for switching to the next track
and search
29. STOP
button
30. REPEAT/RANDOM
button
31. VOL-
button
32. VOL+
button
Note:
The remote control does not operate in the
radio mode.
POWER CONNECTION
Line supply
Before connecting the unit, make sure that your
home electricity supply corresponds to the oper-
ating voltage of the unit.
1. To connect the unit, insert one end of the
power cord in the jack (11) and the other one
– into the socket. Set the
FUNCTION
switch
(4) to the AUX (MP3), OFF or RADIO position.
2. To switch off the unit set the
FUNCTION
(4)
switch to the OFF position.
Note:
Static electricity can lead to interferences
in the operation of the unit. In this case dis-
connect the unit, and then connect it again.
If the problem does not disappear, apply to
the service center.
Battery supply
1. Disconnect the player.
2. Open the battery compartment lid (10), by
pressing the clamp following the arrow.
3. Insert 8 “C” (UM 2) 1,5 V batteries (not sup-
plied) into the battery compartment following
the polarity.
4. Close the battery compartment lid
Attention!
Battery leakage can lead to injuries
and damages of the unit. To avoid damages of
batteries follow the instructions below:
- place the batteries properly.
- take the batteries out if you are not going to
use the unit for a long time.
- do not recharge the batteries, do not dis-
3466IM.indd 4
3466IM.indd 4
17.09.2010 11:04:22
17.09.2010 11:04:22
Downloaded From Disc-Player.com Vitek Manuals
