Vitek VT-2585, Manual Instruction, Page: 4 / 52

4
ENGLISH
•
The hair clipper is not intended for professional use.
•
Use the unit to cut only natural human hair, hair
should be dry.
•
Do not use the unit to cut artificial hair and animal hair.
•
Use only the attachments supplied.
ATTENTION! Do not immerse the hair clipper, the power
cord and the plug into water or any other liquids. Do not
wash the clipper blades under water jet.
•
Do not touch the hair clipper body and the power cord
with wet hands.
•
Do not use the unit outdoors.
•
Do not use the unit in places with high temperature
and relative humidity over 80%.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Do not keep the unit near a bath or a sink filled with
water.
•
If the unit is dropped into water, unplug it immediate-
ly, and only then take it out of the water.
•
Never use the unit if the attachment combs are bro-
ken or damaged or if the blades are damaged.
•
After each use clean the attachments and the blades
with the brush to remove the cut-off hair.
•
Make sure that the blades are clean and that there is
lubricating oil on them.
•
Never leave the operating unit unattended.
•
Switch the hair clipper off during intervals in opera-
tion or when you are not using it.
•
Do not allow children to use the unit as a toy.
•
Do not allow children to touch the hair clipper body
and the power cord during the unit operation.
•
During the unit operation and breaks between opera-
tion cycles, place the unit out of reach of children and
disabled persons.
•
This unit is not intended for usage by children.
•
The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this per-
son on the usage of the unit.
IM VT-2585_70x130.indd 4 7/23/19 6:45 PM