5
ENGLISH
–
You can lift the hair locks and cut them along
the comb.
–
Use scissors to trim hair.
–
With time you will learn to model desired hair-
cuts by yourself.
STYLING
Step one
Install the «4-6 mm» attachment (7). Switch the
unit off by using the power switch (4) "
". Hold
the unit with the blades pointed upwards.
Start cutting from the beginning of the hair growth.
Slowly move the unit upwards. Cut the back of
the head area at the bottom and near the ears.
Step two
Switch the unit off by using the power switch (4)
a second time. Install the «10-12 mm» attach-
ment. Switch the unit on and continue cutting hair
near the crown of the head.
Step 3 – cutting in the temples area
Switch the unit off and install the «4-6 mm»
attachment. Cut the hair on the temples. Then
continue cutting towards the top of the head with
the «10-12 mm» attachment.
Step 4 – cutting the top of the head
Using the «10-12 mm» attachment cut the hair
from the top of the head towards the crown
against the hair growth direction.
Step 5 – the final part
Remove the attachment from the unit, turn the
blades of the unit towards the hair and carefully
trim hair on the temples and neck. Do not press
on the unit; there is danger of injuries or cuts
when open blades come in contact with the skin.
Cone-shaped haircut
Install the necessary attachment (7) and start cut-
ting from the head back towards the crown. Cut hair
against hair growth from the head front to the top of
the head and on the sides. To get a flat top haircut,
use the comb: lift the locks and cut them along the
comb. Comb the hair to reveal uneven locks.
Hair thinning
The essence of hair thinning is in cutting off
separate locks at different height, which allows
achieving smooth transition between locks of
different length. Hair thinning is performed at the
final phase of haircutting with the attachment (9).
CLEANING AND MAINTENANCE
–
Switch the unit off after use.
–
Remove the attachment (7 or 9) from the unit
body and clean the inside and outside of the
attachments (7 or 9) from the cut hair, using
the cleaning brush (12).
–
You can wash the attachments (7, 9) under a
water jet, then wipe them and dry out.
–
Wipe the unit body with a soft slightly damp
cloth. Do not immerse the hair clipper body,
power cord and power plug into water or other
liquids.
–
Never use solvents or abrasives to clean the
unit body and attachments.
Blade block
Attention!
Do not wash the blade block with
water; use lab alcohol to wash the blade block.
Lubricate the blades (1, 2) regularly using the oil
(11) supplied with the unit.
–
Switch the hair clipper off with the
button (4) "
", unplug it if the unit is being
charged.
–
Remove the attachment (7 or 9).
–
Remove the blade block (1, 2) by pressing
on the upper part of the block on the blades
side (fig. 3).
–
Remove the remaining cut hair from the blade
block and the inner side of the unit body sur-
face with the brush (12).
–
Apply one or two drops of lubricating oil (11)
to the teeth of the blades and the supporting
part of the upper blade (fig. 4).
–
Before installing the blade block, make sure
that the hair length shifter (3) is set to the
position "0.5 mm".
–
Insert the ledge on the lower part of the
blade block into the grooves on the unit
body. Press on the upper part on the block
until it is fixed. The clicking sound of the fix-
ator indicates the proper installation of the
blade block.
–
Switch the hair clipper on and make sure that
the blades are moving smoothly.
–
Switch the hair clipper off, wipe off the excess
of oil with dry cloth or a paper towel.
STORAGE
–
Clean the unit and lubricate the blades with
lubricating oil (11) before taking the unit away
for storage.
–
Keep the unit in a dry cool place away from
children and people with disabilities.
IM VT-2582.indd 5
20.06.2018 14:56:22