4
ENGLISH
Cutting hair in the nose
– Make sure that the nasal cavity is
clean.
– Carefully insert the attachment (2)
into the nostril.
– Do not insert the attachment (2)
into the nostril deeper than 0.5 cm.
– Make circular movements with the
unit to remove undesirable hair in
the nostrils.
Cutting hair in the ears
– Make sure that external ear canals
are clean and there is no earwax
inside.
– Carefully insert the attachment (2)
into the external ear canal.
– To avoid injuries of eardrum do not
insert the attachment (2) into the
ear canal deeper than 0.5 cm.
– Make circular movements with the
unit to remove undesirable hair in
the auricle.
– After you finish using the unit,
switch the unit off by setting the
switch (3) to the “OFF” position.
– Put the protection cap (1) on the
attachment (2).
Cleaning and care
– Remove the batteries from the bat-
tery compartment.
– Wipe the outer surface of the unit
body with a soft, slightly damp
cloth; provide that water does not
get into the unit body
– Do not use abrasives and solvents.
– Use the brush (6) to clean the
attachment (2).
– For better cleaning periodically
remove the attachment (2) and rub
it with alcohol.
– Install the attachment (2) back to
its place.
– Insert the battery into the battery
compartment.
Note:
You don’t need to lubricate the
unit.
Technical specifications
Power supply: AA battery, 1,5 V
The manufacturer preserves the right
to change design and specifications
of the unit without a preliminary noti-
fication.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions
can be obtained from the dealer from
whom the appliance was purchased.
The bill of sale or receipt must be pro-
duced when making any claim under
the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid
down by the Council Directive
2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-2551_IM_105x148.indd 4
13.12.2016 17:23:04
