9
ENGLISH
–
When cutting hair on the cheeks, move the
trimmer downwards; move the trimmer
upwards on the neck.
–
After you have cut the beard and mus-
tache, maintain their form.
Shaving
The best shaving results are achieved if your
skin is dry.
Your skin may need 2-3 weeks to get used to
this shaving system.
•
Install the shaving attachment (
8
).
•
Switch the trimmer on by pressing the
button (
3
).
•
Touching the skin slightly, move the trim-
mer back and forth and rotationally at
a time.
•
After shaving switch the trimmer off by
pressing the button (
3
).
•
Clean the shaving attachment (
8
).
Trimmer for cutting hair in the ears
and nose
Be careful when using the trimmer for cutting
hair in the ears and nose (
10
). Insert only the
metal tip of the trimmer attachment into the
auricle or the nostril.
–
Install the attachment (
10
) on the trim-
mer and check whether it is set securely.
–
Switch the unit on by pressing the but-
ton (
3
).
–
Move the metal tip of the trimmer smooth-
ly back and forth and rotationally; carefully
cut hair in the nose and/or ears.
–
After using switch the unit off pressing the
button (
3
).
–
Use the trimmer (
10
) only for cutting hair
in the ears and nose.
CLEANING AND CARE
–
Switch the trimmer off after use.
–
Remove the attachments (
11
,
12
,
13
,
14, 15
) from the blade block (
5
or
6
). Use
the brush (
17
) to clean the inside and out-
side surface of the attachment from the
cut-off hair.
–
Clean the trimmer body with a soft, slightly
damp cloth, and then wipe it dry.
–
Never immerse the trimmer, the blade
blocks (
5, 6
or
7
), the shaving attach-
ment (
8
), the trimmer (
10
) and the power
adapter into water or any other liquids.
–
You can wash the attachment (
11
,
12
,
13
,
14
,
15
) under a water jet, then wipe it dry.
–
Remove the blade block (
5, 6
or
7
) by
pressing on the upper part of the block on
the blades side (
pic. 1
). Clean the blade
block and the inner cavity of the trimmer
under the blade block with the brush (
17
).
Install the blade block (
5, 6
or
7
) back to
its place by inserting the bottom part of
the block into the groove on the unit body
and pressing the upper part of the block
(
pic. 2
). Click of the locks shows that the
blade block is set properly.
–
Installing and removing the shaving attach-
ment (
8
) and the trimmer (
10
) are similar
to installing and removing the blade block.
–
Clean the blade block and the inner cavity
of the trimmer under the blade block with
the brush (
17
).
–
Do not use solvents or abrasives for
cleaning the set.
–
Lubricate the blades with oil (
19
) after
every use.
Taking care of the shaving
attachment (8)
Regular cleaning helps to maintain the shav-
ing system in good and operable condition.
•
Press the buttons (
9
) simultaneously and
remove the outer shaving block.
•
Use the brush (
17
) to clean the outer
shaving block from inside and outside and
to clean the inner cutting block.
•
Install the outer shaving block back to
its place.
STORAGE
–
Clean the unit and lubricate the blades
with lubricating oil (19) before taking it
away for storage.
IM VT-2548.indd 9
22.07.2016 17:15:12
