Vitek VT-2377, Manual Instruction

Page: 4 / 20

4
ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
USING THE HAIRDRYER
After unit transportation or storage at low
temperature it is necessary to keep it for at
least three hours at room temperature before
switching on.
•
Unpack the unit and remove any advertising
stickers that can prevent the unit operation.
Unwind the power cord completely.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
Insert the power plug into the mains socket.
•
The unit is intended for operation with AC sys-
tem and 50 or 60 Hz frequency. The unit does
not need any additional settings for operating
with the required nominal frequency.
Switching hair dryer on
Before switching the appliance on make sure
power supply voltage meets operating voltage of
the appliance.
• Insert power cord plug into wall outlet.
• Select operating speed you need using airflow
speed switch (1):
0 = the hairdryer is switched off;
= low speed;
= high speed;
• Select airflow temperature you need using
heating degree switch (2).
= slight heating cold air
= medium heating
= maximal heating
= Cool shot function, press and hold the
cool shot button for fixing your hairstyle.
Taking care about your hair
Before drying and setting your hair, wash them
with shampoo, dry with towel to remove excessive
moisture and brush for better results.
Fast drying
Set switch (2) into position of maximal heating
(position ), select airflow speed you need using
switch (1) and dry your hair out a little bit. Shake off
excessive moisture by hand or using a brush and
continuously move the hair dryer over your hair.
Straightening your hair
Set switch (2) into position of maximal heating
(position ), select airflow speed you need using
switch (1) and dry your hair out a little bit. When
your hair are almost dry, install concentrating noz-
zle (4), reduce degree of air heating by switch (2)
and airflow speed by switch (1).
Divide your hair into locks and layers and start
straightening from the lower layers. Using a plain
or a round comb, brush the hair downwards and
simultaneously direct hot air from the nozzle at
your hair. This way, slowly straighten each lock
from root to end. After you finish straightening the
locks of the lower hair layer, start straightening the
locks of the middle layer and finish with the locks
of the upper hair layer.
Natural waving structure of your hair
Set switch (2) into position of slight heating (posi-
tion ), then set switch (1) into position , hold a lock
between your fingers tightly, turn it to direction of its
natural curliness, then dry the lock out by directing air
jet between the fingers. After getting the shape you
need, press cool shot button (2) and fix each lock.
Volume styling
Using hair dryer in any mode of heating/any speed
from slight to maximal, dry out hair roots begin-
ning from backside of your head.
Styling your hair
Set switches (1,2) into positions of slight heating and
slow speed correspondingly, attach concentrating
nozzle (4) to provide directed airflow.
Divide your hair into locks and create a required hair
style using a round hairbrush. During hair styling di-
rect the air flow straight onto your hair in the desired
direction.
If necessary, direct air jet on each lock for 2-5 seconds
to fix it. Time of setting locks you should determine on
your own taking into account type of your hair.
«Cool shot»
This model is equipped with function of “cool shot”,
which can be used for fixing your hairstyle. Press
and hold “cool shot” button (3) . This option helps
to protect the hairstyle you have created.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of protec-
tion against overheating. This function switches
the appliance off if temperature of outgoing air is
higher then admitted. If hair dryer is switched off
during operation, turn it off by setting switch (1)
into position “0”, take power cord plug out of wall
outlet, examine if air inlet or outlet openings are
blocked, leave the appliance for a while for cool-
ing down for 5-10 minutes, then switch it on again.
Do not block air openings while using hair dryer and
avoid your hair getting inside its air inlet opening.
IM VT-2377.indd 4 11/6/19 1:55 PM