5
ENGLISH
•
During operation and breaks between operation cycles, the
unit should be placed out of reach of children.
•
The unit is not intended to be used by people with physical,
sensory or mental disabilities (including children) or by per-
sons lacking experience or knowledge if they are not under
supervision of a person who is responsible for their safety or if
they are not instructed by this person on the usage of the unit.
•
If the power cord is damaged, it should be replaced by the
manufacturer, a maintenance service or similar qualified per-
sonnel to avoid danger.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it was
dropped, unplug the unit and apply to any authorized service
center at the contact addresses given in the warranty certifi-
cate and on the website www.vitek.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and disabled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY. ITS
COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND
WORK SPACES IS PROHIBITED.
USING OF MEN SHAVER
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature before
switching on.
Battery charging
Before using the shaver for the first time or after a long period of
inactivity the battery needs to be charged for 10 hours.
•
Connect the shaver to the power adapter (12) using the USB
cord (11), the charging indicator (8) will start flashing.
•
After charging is finished the indicator (8) will glow constantly.
•
Battery recharging cycles should not exceed eight hours.
Notes:
– Recharge the battery only after its full discharge.
– Charge the battery at the temperature from 0°C to +35°C.
– If you haven’t used the shaver for a month or longer, fully
charge it before use.
Shaving block (3) removal and installation (fig. 1)
•
Press the button to open the shaving block.
•
Pull upwards to detach the shaving block removable part (3).
•
Insert the removable part (3) back into the shaving block
body (4).
Shaving heads (2) removal (fig. 2)
•
Turn the shaving block (3) clamping frame knob counter-
clockwise.