Vitek VT-2293, Instruction Manual

Page: 5 / 24

5
ENGLISH
«Cool shot»
This model is equipped with function of “cool shot”,
which can be used for fixing your hairstyle. Press and
hold “cool shot” button (3) . This option helps to
protect the hairstyle you have created.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of protec-
tion against overheating. This function switches
the appliance off if temperature of outgoing air is
higher then admitted. If hair dryer is switched off
during operation, turn it off by setting switch (1) into
position “0”, take power cord plug out of wall outlet,
examine if air inlet or outlet openings are blocked,
leave the appliance for a while for cooling down for
5-10 minutes, then switch it on again. Do not block
air openings while using hair dryer and avoid your
hair getting inside its air inlet opening.
CLEANING AND MAINTENANCE
This hair dryer is intended for household usage
only.
• It is recommended to remove air inlet grill (5) and
clean it from time to time.
• Set switch (1) into position “0” and disconnect
the appliance from power supply.
• Press on the grid clamps simultaneously and re-
move the grid. Clean the grid with a brush, install
the grid to its place.
• Wipe hair dryer housing with damp cloth and
wipe it dry afterwards.
• Do not use solvents or abrasives for cleaning of
the hairdryer body.
STORAGE
• Unplug power cord from wall outlet when hair
dryer is not in use.
• Do not wind power cord around the appliance as
doing so may cause cord’s malfunction. Handle
power cord carefully, do not pull, twist or stretch it,
especially near the plug and the place of connec-
tion with appliance housing. If power cord is twisted
during operation, straighten it from time to time.
• For easy usage there is a hanging loop (7), you
can store the unit by means of this loop on condi-
tion that no water gets on the unit in this position.
• Keep the hairdryer in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
Hair dryer – 1 piece
Concentrating nozzle – 1 piece
Operating manual – 1 piece
SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 1700-2000 W
ATTENTION! Do not use the unit near water in the
bathrooms, showers, swimming pools etc.
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affect-
ing general principles of the unit operation without
a preliminary notification due to which insignifi-
cant differences between the manual and product
may be observed. If the user reveals such differ-
ences, please report them via e-mail info@vitek.ru
for receipt of an updated manual.
Service life of the unit – 3 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.
IM VT-2293.indd 5 21.06.2019 14:44:59