6
ENGLISH
Backup power supply batteries leakage can
cause injuries or the unit damage. To avoid
the unit damage, follow the instructions given
below:
–
use only the «AAA» batteries;
–
do not use old and new batteries at the same
time or different types of batteries;
–
do not recharge the batteries;
–
insert the batteries strictly following the polarity;
–
remove the batteries if you are not planning to
use the unit for a long time;
–
apply to specialized centers for further recy-
cling of the batteries;
–
avoid the power nippers circuit.
ASSEMBLING THE VACUUM CLEANER
•
Turn over the vacuum cleaner body and install
two side brushes (11).
•
Connect the power adapter (24) connecting
cord jack to the socket (23) on the charging
station.
•
Place the charging station on a flat floor sur-
face next to the wall, the charging station base
must be perpendicular to the floor.
•
There should be at least 2 meters of free
space in front of the charging station and at
least 1 meter at the sides (see the picture).
•
Remove the protective inserts between the
bumper and the vacuum cleaner body.
BEFORE USING
THE VACUUM CLEANER
•
Remove all kinds of power cords, power
extension cords and other similar items from
the floor that may interfere with the movement
of the vacuum cleaner.
•
The vacuum cleaner is intended for operation
on a smooth floor or on a carpet with low pile
(no more than 1 cm). Do not use the vacuum
IM VT-1804_2020.indd 6
4/21/20 2:05 PM
