6
ENGLISH
CLEANING AND MAINTENANCE
•
It is recommended to clean the dust bin
(13) and the filter (14) after every use of
the vacuum cleaner.
•
Before cleaning switch the vacuum
cleaner off by setting the power switch (2)
to the position “OFF”.
•
Open the lid (3), take the dust bin by the
sides and remove it.
•
Lift the locks (15) and remove the lid (16).
•
Remove the mesh filter (14).
•
Remove dust and garbage from the dust
bin (13).
Wash the dust bin (13), the mesh filter (14)
and the lid (16) under a warm water jet.
•
Dry the filter (14), assemble the dust bin
and install it into the vacuum cleaner body,
close the lid (3).
•
Before installing the dust bin make sure
that all the details (13, 14, 16) are dry.
Notes:
–
do not wash the details (13, 14, 16) in a
dishwashing machine;
•
Unscrew the fastening screws with a
screwdriver (not included) and remove the
side brushes (8), wipe them with a slightly
damp cloth, clean the brush (8) installa-
tion places from dust.
•
The side brushes (8) are not interchange-
able, before installing the brushes (8)
make sure that they are installed properly
(see the chapter “USING THE VACUUM
CLEANER”.
•
Clean the front wheel (10) from dust and
garbage and wipe it. Remove hair, if there
are any, make sure that nothing hinders
the wheel (10) free rotation.
•
Clean and wipe the anti-drop sensors (7)
on the bottom part on the vacuum cleaner
body.
•
Wipe the front bumper (4).
•
Clean the air outlets (12).
•
Wipe the vacuum cleaner body with a
slightly damp cloth and then wipe it dry.
•
Do not immerse the vacuum cleaner body,
the power adapter (17) and the connect-
ing cord of the power adapter into water
or any other liquids. Provide that no liquid
gets inside the vacuum cleaner body.
IM VT-1801.indd 6
7/3/19 11:35 AM