Vitek VT-1393 W, Manual Instruction, Page: 5 / 28

5
ENGLISH
The massager is intended for using on the collar zone.
The collar zone is easy to damage by pinching a nerve, straining
a ligament etc. Besides the pharmaceutical treatment you can
perform massage sessions with the massager.
MASSAGING
The massager is intended for the collar zone massage.
Besides the pharmaceutical treatment you can perform mas-
sage sessions with the massager.
Attention! Avoid direct impact on the vertebrae and perform
all massage techniques on both sides of the spine during spine
massage.
•
Switch the massager on with the switch (3) and select the
required massage intensity.
•
Massage the selected body area no longer than 3 minutes,
then move the massager to another body area.
•
After a 10-15 minute massage session switch the unit off by
setting the switch (3) to the position «OFF».
Note : Make at least a 30-minute break after every massage
session.
RECOMMENDATIONS
–
Use the massager in at least an hour after meals.
–
Do not use the unit for head massage.
–
Do not use the massager at ambient temperature above
35°С and in rooms with high humidity.
– If you feel unpleasant symptoms during using the massager,
stop using the unit immediately and see your doctor.
– For massaging put the massager to the wanted body
area, do not press on the massage head (1) with exces-
sive effort.
–
It is recommended to start massaging from the neck, then
moving to the back.
– Recommended massage time for one body area is from
3 to 5 minutes.
– General massage session should be no longer than
10-15 minutes with a subsequent 30-minute break.
CLEANING AND CARE
•
Switch the unit off by setting the power switch (3) to the
position «OFF».
•
Wipe the massager body (2) with a soft dry cloth; if it is very
dirty, clean the unit body (2) with a slightly damp cloth and
then wipe it dry.
•
Do not use abrasive substances and solvents to clean the
unit body (2).
IM VT-1393_70x130.indd 5 22.09.2017 12:39:43