SAGA “ST” Series
98
Adjust the sensitivity of the motion detection from 1 to
5 by pressing the + or – buttons.
The default is 5.
Highlight AREA SETUP and then press the ENTER
button to access the motion grid setup screen.
Move the grey cursor around using the directional
buttons, and then press the ENTER button to disable
each grid. Press the ESC button to return to motion
menu.
z
No tint: motion detection on
z
Green tint: motion detection off
The default is on for all grids.
Highlight TEST MOTION and then press the ENTER
button to access motion testing screen.
Any grid that detects motion will flash a purple tint for
the period of time that it detects motion.
Summary of Contents for SAGA VT-ST1620
