7
ENGLISH
will be restored some time depend-
ing on the position of the temperature
regulator.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recom-
mend cleaning the steam chamber, espe-
cially in the regions with “hard” water.
• Set the steam supply regulator (3) to the
steam release OFF position.
• Fill the water tank (10) till the MAX mark
(12).
• Put the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the
MAX. temperature: “
max
” the (9) indica-
tor will light up.
•
When the soleplate temperature (13)
reaches the desired temperature point,
the (9) indicator will go out, you can start
cleaning of the iron chamber.
• Unplug the iron, set the temperature reg-
ulator (11) to the
«
MIN
» position
.
• Pull the plug out of the socket.
• Hold the iron above the sink, press and
hold the button (14).
• Boiling water together with scale will be
throwing out from the openings in the
iron soleplate (13).
• Slightly sway the iron back and forth, un-
til water goes out of the water tank (10).
• Place the iron on the base (8) and let it
cool down completely.
• When the soleplate (13) cools down com-
pletely, wipe it with a dry cloth.
• Before you take the iron for storing, make
sure that there is no water in the water
tank (10) and that the iron soleplate (13)
is completely dry.
CARE AND CLEANING
• Before cleaning the iron, make sure that it
is turned off and has cooled completely.
• Wipe the iron's outer surface with a damp
cloth and then wipe dry.
• Sediment on the iron soleplate can be
removed with a cloth soaked in vinegar-
water solution.
• After removing sediment, polish the sole-
plate with a dry cloth.
• Do not use abrasive substances to clean
the soleplate and body of the iron.
• Avoid touching the iron soleplate with
sharp metal objects.
STORAGE
• Turn the temperature regulator (11) anti-
clockwise till MIN position, set the steam
release regulator (3) to the steam release
OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the
iron and pour out any remaining water
from the water tank (10).
• Close the lid (2).
• Set the iron vertically and allow it to cool
completely.
• Keep iron at dry cool place in vertical po-
sition out of the reach of children.
TECHNICAL CHARACTERISTICS
Power requirements: 220-240 V ~ 50 Hz
Power consumption: 1850-2200 W
Specifications subject to change without
prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom
the appliance was purchased. The bill of
sale or receipt must be produced when
making any claim under the terms of this
guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Law Voltage
Regulation (73/23 EEC)
VT-1209.indd 7
VT-1209.indd 7
11.08.2009 15:20:05
11.08.2009 15:20:05
