![Vitec Multimedia VT-1809 B Instruction Manual Download Page 6](http://html1.mh-extra.com/html/vitec-multimedia/vt-1809-b/vt-1809-b_instruction-manual_1034964006.webp)
6
ENGLISH
Usage of the fabric or paper dust bag
(Pic. 6)
• Open the dust bag lid (17), holding the
clamp (6).
• Insert a fabric (18) or paper dust bag
(18) into the dust bag holder.
• Close the dust bag lid (17).
Removal of the fabric or paper dust
bag
• Open the dust bag lid (17) and remove
the dust bag.
• A paper dust bag (23) is disposable
and should be utilized when filled.
• A fabric dust bag (18) is reusable, re-
move dust and rubbish out of it, by
moving the plastic clamp, after clean-
ing set the clamp on its place.
Operating instruction
Before operating extend the net cable for
a needed length and insert the plug into
the socket. Yellow mark on the net cable
notices about max. cable length.
Do not extend the net cable beyond the
red mark.
Attention!
- Always switch the vacuum cleaner
on only with the paper or fabric dust
bag
(18, 23) and filters (12, 15) in-
stalled.
- While using a paper (23) or a fabric
(18) dust bag, make sure that it is
set properly.
Note:
If a dust bag is set improperly, the
dust bag will not close, always check
whether the dust bag is set properly
before closing the lid.
1. To switch the vacuum cleaner on press
the ON/OFF (14) button.
2. During operation you can regulate
suction power by moving power regu-
lation handle (13) or by the mechani-
cal regulator situated on the handle of
the flexible hose (3) .
3. After you have finished cleaning press
the ON/OFF button (14) and pull out
the plug from the socket.
4. To wind the net cable press the button
(9), hold the winding cable with your
hand in order to avoid whipping and
damage.
AUTO OFF FUNCTION
The vacuum cleaner is equipped with
auto cut-off function while overheating.
•
While overheating auto thermo fuse
will activate. The vacuum cleaner will
switch off.
• In this case immediately pull the plug
out of the socket.
• Check if the extension pipe and the
flexible hose are - clean them.
• Let the vacuum cleaner cool clogged
down for about 20-30 minutes, before
you can switch it on again.
• Plug the vacuum cleaner, in switch it
on; if you cannot switch on the unit, it
may mean that the unit is damaged. In
this case contact an authorized service
center for repair.
MAINTENANCE
If during the operation the dust bag filling
indicator (8) will become “red”, replace
or clean the dust bag. To do it, switch off
the vacuum cleaner and unplug it, then
replace the paper dust bag or clean the
fabric dust bag.
Keep the filter (15) clean, the efficiency
of the unit depends on it; clean the filter
three or four times a year or even oftener
if necessary. Replace the НЕРА-filter
(12) if necessary.
1809.indd 6
1809.indd 6
07.10.2009 10:54:50
07.10.2009 10:54:50
Summary of Contents for VT-1809 B
