12
1st Time Installation
1 .
Apply the horizontal and vertical brakes and hold the head firmly
with one hand.
Mounting the Head and Setting Connector
Tension
2 .
Lift the SpeedLevel Lever as shown all the way to the top.
3 .
Lower the head onto the Bowl Connector and release the
SpeedLevel Lever.
CAUTION!
Try to lift the head from the tripod to ensure it
has latched onto the connector. If the head lifts free of the
connector the clamp has been tightened too much and will
require loosening. With the head removed turn the Adjustment
Knob anticlockwise until the head will latch onto the connector
by repeating steps 2 and 3.
!
