14
1. Fasteners should be attached to the main frame of the wheelchair. Attachment to additional
elements of the wheelchair or accessories (i.e. spokes, brakes or footrests) is prohibited.
2. Fasteners should be wrapped as tightly as possible at an angle of approximately 45 degrees
and locked in accordance with the manufacturer's instructions.
3. It is forbidden to make changes to the anchor points or the structure and the frame or
subassemblies, or to exchange them for others without consulting the manufacturer. Failure to
do so may prevent the wheelchair from being transported in the vehicle.
4. The wheelchair’s hand brakes must be firmly applied.
Instructions for preparing the user for riding:
1. The lap belt should be positioned low in front of the hips so that the side view of the lap belt
angle is between 30 and 75 degrees from the horizontal (Illustration 22.). A larger angle is
preferred.
The lap belt is bolted to the back tube using pads.
Attention!
The lap belt is not part of the wheelchair or passenger safety system during transportation
in a vehicle for disabled people.
2. Put on the chest belt over the shoulder across the chest (Illustration 21.) The safety belts
should be tight and make sure they are not twisted.
3. The anchor positions are:
Illustration 21.
Illustration 22.
Chest belt
Lap belt
