12
•
Before mounting the tray, legs must be screwed.
•
Then unscrew the fasteners screw. Put into it two washers (one smaller second bigger), it is
important that the washes were properly pressed into the fastening element..
Illustration 28.
•
The fastener must be installed in such a way that the screw after tightening to be directed
forward in relation to the wheelchair, and the table legs mounting holes that they are located
behind the armrest frame. (Illustration 28.)
Illustration 29.
•
Feet tray should be placed in the holes mounting legs. (Illustration 29.)
•
It is important that the tray gap be located in to the seat wheelchair.
•
To remove a tray, pull out the legs of the mounting holes..
•
For easy installation of your table, you can leave fasteners with a wheelchair.
SITTING ON THE WHEELCHAIR:
•
Place the wheelchair in a position that will make easier transporting patient (by the bed, chair,
close to lifting distance)
•
Block both brakes of wheelchair, fold or remove the footrests.
•
Depending on the method of moving the patient, remove the correct armrest (it is
recommended to leave the second armrest as a handrail for the patient and prevent slipping out
of the wheelchair).
•
Place the patient the wheelchair.
Fasteners
