12
BELTS SYSTEM
•
The stroller is equipped with a stabilizing belts
whose length can be adjusted
(Illustration
20.).
•
Settings of all stabilizing elements should be discussed with your doctor or physiotherapist.
•
To ensure safety, after placing the child in the stroller, caretaker should immediately buckle
them into stabilizing belts.
•
Security system include three-point seat belts with central buckle and lap belt with buckle.
•
Shoulder belts should run along the child body from the shoulders to the waist.
•
Both elements of the buckle should be placed in the central fastener. To do this, press the
button on the buckle and place the elements (Illustration 24.).
•
While placing elements of buckle into central buckle there must be a click. Only if click is
heard, three-point belts are properly fastened.
•
To properly protect your child, adjust the length of the belt using the adjustment belt elements.
•
To unfasten three-point belts, press the button on the central part of three-point seat belt and
unfasten the lap belt buckle.
ADJUSTING THE ANGLE OF THE SEAT
•
The stroller is equipped with a lever to change the angle of the seat.
•
To change the seat angle, turn both levers from the vertical position to the horizontal position.
•
Grab the upper part of the backrest and move it up or down to set the desired angle.
•
When the seat is adjusted to the desired angle, lock the levers on both sides of the stroller
(vertical position).
MOVING ON SLOPES
•
While moving on slopes, use caution and reduce your speed.
•
Do not move on too high slopes. The maximum allowable slope angle up and down is 5%.
Belts adjustment
elements
seat belt three-point
Shoulder belts
Seatbelt three-point
buckle
Illustration
23.
Illustration
24.
