VITE VT-8306 G, Manual Instruction

Page: 6 / 24

6
ENGLISH
ton (5) with a 4–5 second interval, steam will be
released from the soleplate (13) intensively.
Important information
Vertical steam is not recommended for synthetic
fabrics.
•
To avoid fabric melting, do not touch it with the
iron soleplate while steaming.
•
Never steam clothes on a person as the steam
temperature is very high, use clothes hanger
or a stand.
•
After you finish ironing, switch the iron off, wait
until it cools down completely, then open the
water inlet lid (2), turn the iron over and drain the
remaining water.
STEAM CHAMBER CLEANING
To prolong service life of the iron, we recommend
cleaning the steam chamber regularly, especially in
regions with hard tap water.
•
Set the continuous steam supply knob (3) to
the leftmost position - continuous steam sup-
ply is off.
•
Fill the water tank (10) until it’s filled half way.
•
Place the iron on its base (8).
•
Insert the power plug into the mains socket.
•
Set the control knob (11) to the maximum sole-
plate temperature «
•••
» or «MAX», the indicator
(9) will light up.
•
When the soleplate (13) reaches the desired
temperature value, the indicator (9) will go out,
you can start cleaning.
•
Set the temperature control knob (11) to the
“
OFF ” position to switch off the iron.
•
Unplug the unit.
•
Hold the iron above the sink horizontally, press
and hold down the self-clean button (14).
•
Boiling water and steam with scale will be
released from the iron soleplate (13) openings.
•
Slightly sway the iron back and forth, until water
goes out of the water tank (10) completely.
•
Place the iron on the base (8) and let it cool
down completely.
•
Once the soleplate (13) cools down completely,
wipe it with a dry cloth.
•
Before you take the iron away for storage, make
sure that there is no water in the water tank (10)
and that the iron soleplate (13) is completely dry.
CLEANING AND CARE
•
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
•
Clean the iron body with a slightly damp cloth
and then wipe it dry.
•
Scale on the iron soleplate can be removed with
a cloth soaked in vinegar-water solution.
•
After removing scale, polish the soleplate sur-
face with a dry cloth.
•
Do not use abrasive substances to clean the iron
soleplate and body.
•
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
•
Turn the temperature control knob (11) coun-
terclockwise to the “
OFF ” position, and set the
continuous steam supply knob (3) to the left-
most position – steam supply is off.
•
Unplug the unit.
•
Open the water inlet lid (2), turn the iron over
and drain any remaining water from the water
tank (10).
•
Close the lid (2).
•
Put the iron vertically and let it cool down com-
pletely.
•
Store the iron vertically in a dry cool place out of
reach of children.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Power consumption: 2000-2400 W
The manufacturer preserves the right to change
the design and the specifications of the unit without
a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
IM VT-8306.indd 6 28.10.2016 10:09:14