START
STOP
Measuring
After correctly positioning the cuff and selecting the user
you are measuring for, press the “Start” button to activate and
complete the measurement process.
Press the “Stop” button at anytime during the
process to stop the measurement.
One completed, press the “Stop” button to
turn off the monitor otherwise it will turn off
automatically.
Taking a
Measurement
Caution
When using this device, please pay attention to the following situations which may interrupt blood flow
and influence blood circulation, thus having the potential to cause injury to the patient: too frequent
or consecutive measurements; the application of the CUFF and its pressurization on any arm where
intravascular access or therapy, or an arterio-venous (A-V) shunt, is present; Inflating the cuff on the arm on
the side of a mastectomy.
Do not apply the cuff over a wound, doing so may cause further injury. Do not inflate the cuff on the same
limb which other monitoring equipment is applied around simultaneously, this could cause temporary
loss of function of those simultaneously-used monitoring equipment. Don’t link the connection tube, to
anything that can result in the cuff pressure continuously increasing which can prevent blood flow and
result in harmful injury.
12
