Measuring
After correctly positioning the cuff and turning the
monitor on, press User 1 or 2 button, depending on
which you are using, to activate and complete the
measurement process.
Press your User button again to stop the monitor at
anytime during the process.
Once completed, your measurement will display for
one minute before tuning off.
Taking a
Measurement
Caution
When using this device, please pay attention to the following situations which may interrupt blood flow
and influence blood circulation, thus having the potential to cause injury to the patient: too frequent
or consecutive measurements; the application of the CUFF and its pressurization on any arm where
intravascular access or therapy, or an arterio-venous (A-V) shunt, is present; Inflating the cuff on the arm
on the side of a mastectomy.
Do not apply the cuff over a wound, doing so may cause further injury. Do not inflate the cuff on the same
limb which other monitoring equipment is applied around simultaneously, this could cause temporary
loss of function of those simultaneously-used monitoring equipment. Don’t link the connection tube, to
anything that can result in the cuff pressure continuously increasing which can prevent blood flow and
result in harmful injury.
12
