background image

11

WARNING

Rotating Blades Can 

Cause Severe Injury.

• 

DO NOT

 put hands, spatulas etc. into 

the container while the blender is 
running or while the container is still 
on the base.

• 

Lids and tampers are not 
interchangeable between different 
container styles, types and sizes. 
Use the tamper that was supplied 
with your blender.

IMPORTANT!

• 

T

he tamper splash disk (near 

the top of the tamper) and lid 
prevent the tamper from hitting 
the blades when the lid is on the 
container in the locked position.

• 

The container should not be more 
than two-thirds full when the 
tamper is used during blending.

• 

To avoid overheating during 
blending, DO NOT use the tamper 
for more than 30 consecutive 
seconds.

• 

If the food does not circulate, the 
blender may have trapped an air 
bubble. Carefully remove the lid 
plug, while making sure the lid 
stays firmly in place. Release the 
air bubble by inserting the tamper 
through the lid plug opening.

HOW TO USE THE TAMPER

• 

Holding the tamper straight down may not help the ingredients circulate.  
If necessary, point the tamper towards the sides or corners of the 
container. DO NOT try to force the tamper more deeply into the container.

Tamper Splash Disk

 

Tamper

Lid 

Blade Assembly

Summary of Contents for VM0102





















Reviews: