background image

WaRRanTy

LIMITED WARRANTY

In order to maximize the life and keep your Vitamix® product in good working order, 
it is important that you follow a few simple maintenance tips:
1.  Periodically inspect the drive socket for visible wear and tear, cracks, or  

brakes to the socket. If damage is found, replace the drive socket with the  
extra drive socket enclosed with your blender. To purchase additional  
replacement drive sockets contact Vitamix at 1-800-437-4654 (1-800-4DRINK4) 
for a dealer near you. For customers outside the U.S.A., contact your authorized 
Vitamix Distributor, or call the Vitamix International Division at +1.440.782.2450 or  
email [email protected] for a distributor near you.

2.  Manually rotate the blade bearing assembly to make sure it turns without 

hesitation or doesn’t spin too freely. If the blade hesitates or spins too freely, 
contact Vitamix at 1-800-437-4654 (1-800-4DRINK4) for warranty information or 
a dealer near you. For customers outside the U.S.A., contact your authorized  
Vitamix Distributor, or call the Vitamix International Division at +1.440.782.2450  
or email [email protected] for a distributor near you.

3.  Never run the machine without the centering pad properly placed on the base.  

Vita-Mix® Corporation (hereinafter “Vita-Mix”) warrants to the original end-user  
(proof of purchase required) purchased in the U.S.A., that this commercial  
Vita-Mix blender (hereinafter the “Equipment”) is free from defects in material  
and workmanship for the warranty periods applicable to the Equipment as 
described herein and subject to the conditions set forth below.

Motor Base

Vita-Mix warrants to the original end-user that:
•  If the motor base fails within thirty (30) days from the date of purchase,  

Vita-Mix will replace the motor base without charge.

•  If the motor base fails after thirty (30) days but within one year from the date  

of purchase, due to a defect in materials or workmanship, Vita-Mix will assume  
the cost of all parts and labor necessary to repair the motor base.

•  If the motor base fails after one year but within three (3) years from the date  

of purchase due to a defect in materials or workmanship, Vita-Mix will assume  
the cost of the parts deemed necessary to repair the base.

Container, Lid, Blade Assembly, Drive Socket and Sound Enclosure 

(if included)

The container, lid, blade assembly, drive socket and where included a Vita-Mix 
manufactured sound enclosure, are warranted against defects in material and 
workmanship for one year from the date of purchase.    

Conditions

•  The warranties contained herein run only to the original end-user and are  

not transferable. To make a warranty claim, proof of purchase is required.

•   This warranty is the sole remedy of the purchaser and sets forth the only obligations 

24

of Vita-Mix and does not cover normal wear-and-tear, abuse, misuse,  

negligent use, alteration of the base or container (or the sound enclosure),  

or exposure to extreme conditions and is only valid if the Equipment is used in 

accordance with the accompanying instruction booklet (which may also be  

accessed at www.vitamix.com/foodservice).

•  If applicable, improper installation or ventilation in the case of the in-counter model of 

the Equipment, or placing the Equipment in a sound enclosure not manufactured by 

Vita-Mix will void this warranty.

•  This warranty is void in the event that repairs to the Equipment are performed  

by someone other than Vita-Mix or an authorized Vita-Mix Service Center.   

Vita-Mix will not be responsible for the cost of any unauthorized repairs.

•  The sole obligation of Vita-Mix under this warranty is to repair or replace  

the warranted part or parts as determined exclusively by Vita-Mix.

In no event, whether based on contract, indemnity, warranty, tort (including 

negligence), strict liability or otherwise, shall Vita-Mix be liable for any special, 

indirect, incidental or consequential damages whatsoever including, without 

limitation, loss of profit or revenue. The above limited warranty is your exclusive 

remedy, and you and Vita-Mix hereby expressly disclaim all other warranties or 

conditions, express or implied, statutory or otherwise, including any implied 

warranty of merchantability and any implied warranty of fitness for a particular 

purpose, and, without limiting the generality of the foregoing, you and Vita-Mix 

hereby expressly exclude, to the extent permitted by law, the application of any 

sale of goods legislation and the United Nations Convention on Contracts for 

the International Sale of Goods, as may be applicable.

Some jurisdictions do not allow a limitation on implied warranties  
or on special, incidental or consequential damages. 
No employee of Vita-Mix or any other person is authorized to make any 
warranty in addition to or amendment of the warranties made herein.  
For warranty details for machines purchased outside the U.S.A., contact your 
authorized Vita-Mix distributor, or call the Vita-Mix International Division at 
+1.440.782.2450 or email [email protected] for a distributor near you.
In the event your Vita-Mix blender needs service or repair covered by the terms 
of this warranty, please call the Vita-Mix Corporation for warranty assistance. For 
machines purchased in the U.S.A., call Vita-Mix Technical Support: 800-886-5235.  
If purchased outside the continental U.S.A., contact your authorized Vita-Mix 
Distributor, or telephone the Vita-Mix International Division at +1.440.782.2450  
or email [email protected] for a distributor near you.
Any item sent to Vita-Mix pursuant to the terms hereof must be sent in  
original or sufficient packaging. Customer is responsible for in-bound freight 
costs for warranty service. Do not return or send in products without the 
approval from Vita-Mix. All product returns must have the Return Authorization 
Number clearly marked on the outside of the box. Any product that is sent  
to Vita-Mix without prior authorization or approval will be returned to the 
shipper’s address “as is” without repair. 

25

Summary of Contents for The Quiet One In-Counter
















Reviews: