EN
16
Control Panel
By pressing the buttons on the control panel, the following functions can be chosen:
7
Switch the heat on and off
8
Switch the device on and off
9
Select the massage programme. The device has
4 different massage programmes.
After 15 minutes the device automatically switches off.
10 HEAT
Control lamp: lights up when heat is switched on.
9
10
7
8
Use
PLEASE NOTE!
■
Do
not
use the device in bed. Do
not
fall asleep while using the device.
■
The device must not be folded up or covered when it is switched on. Do not place the
mains cable on or beneath the device during operation.
1. Place the massage seat cushion on a chair, for example.
2. Place the fastening elastic bands around the backrest and seat surface and
fi
x them
in place with the Velcro fasteners so that the seat cushion does not slip.
3. Connect the coaxial connector of the mains adapter or car adapter to the connecting
socket on the device and plug the mains adapter into an easily accessible plug socket
or plug the car adapter into the cigarette lighter.
4. Sit on the massage seat cushion and lean back.
5. Press the button to switch on the device. The device starts to massage.
6. Press the button to switch between the different massage programmes.
7. Press the
button to add heat. The
HEAT
control lamp lights up.
8. Press the
button again to switch off the heat. The
HEAT
control lamp goes out.
9. After 15 minutes the device automatically switches off. It can also be switched off at
any time by pressing the button.
10. Pull the mains adapter out of the plug socket or pull the car adapter out of the ciga-
rette lighter.
11. Disconnect the mains cable of the mains adapter or the car adapter from the device.
12. Allow the device to cool down if the heating function was activated before it is stored
away or cleaned (see the “Cleaning and Storage” chapter).