Vitalinq 94A-07, Operation And Installation Manual

Page: 27 / 47

21
4 Press
O
(BACK) to return to the previous display.
The following items can be set:
EQ7 PRESET
EQ7 SETTING
POSITION - NOT USED
BALANCE
Adjusts the sound balance: “RIGHT-15” – “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level between rooms: “FRONT-15” – “CENTER” – “REAR-15.”
DM+
RB ENH (Rear Bass Enhancer) - NOT USED
SW LEVEL (Subwoofer Level) - NOT USED
AUX VOL
*1
(AUX Volume level)
Adjusts the volume level for each connected auxiliary equipment: “+18 dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust the volume level between sources.
*1 When AUX source is activated
Selecting the sound quality — EQ7 Preset
You can select an equalizer curve from 7 equalizer curves (XPLOD, VOCAL, EDGE,
CRUISE, SPACE, GRAVITY, CUSTOM or OFF).
1 During reception/playback, press , rotate the control dial until “SOUND”
appears, then press it.
2 Rotate the control dial until “EQ7 PRESET” appears, then press it.
3 Rotate the control dial until the desired equalizer curve appears, then press it.
4 Press
O
(BACK) twice.
To cancel the equalizer curve, select “OFF” in step 3.
Tip
The equalizer curve setting can be memorized for each source.