Century House, Roman Road, Blackburn, BB1 2LD
www.vitalenergi.co.uk
5
Care Instructions
•
Only use the unit for the purpose it is intended.
•
Do not use sharp objects on the display as it could become damaged.
•
Do not put the unit in any liquids and keep it away from heat-generating sources
or areas with high moisture.
•
Excessive impact or shock could damage the unit. If the display is damaged,
avoid touching the liquid crystals inside it as it could cause skin irritation. If irritation
occurs, please seek medical attention.
Setting up your In-Home Display
Only use the adapter provided in the box to power your In-Home Display.
Set up the unit in an easily visable location, near a power socket.
Step 2
Step 3
Step 1:
Insert the two AAA batteries supplied in the box
and make sure that they are fitted correctly,
shown by the +/- terminal markings in the
battery compartment, (refer to page 17).
Step 2:
Hold the display with the screen facing away
from you and hold the small end of the power
adapter cable, with symbol ‘B’ facing towards
you. Plug the cable into the socket at the back
of the display, as shown on the right.
Step 3:
Push the wire into the groove of the cable grip.
This will secure the connector.
Step 4:
Plug the other end into a mains outlet and turn
on the power. The display screen should come
on.
Cable grip
Power connector
In-Home Display
power socket