VI-‐7200S
installation Guide
01A.04
7
①
Micro SD Card Socket
It is a memory card slot for external storage.
②
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-‐T Ethernet.
This LED lights up as orange and turns green when the encoder is powered on.
LED operation setting:
For the factory default setting, LED 2 blinks for the heartbeat and LED 1 turns on for video
signal. To change its setting, refer to the section 4.5.11. LED Setting of the NVC Web Page
User’s Manual.
③
8 pin terminal block for audio, DI, and DO
Refer to the section “5.1.Connectors” for more specific information.
④
6 pin connector for analog video output, RS485, and power
Refer to the section “5.1.Connectors” for more specific information.
⑤
Reset
Reset switch is used for restarting the camera or resetting it to Factory Default (FD). Refer to
the section “6.3. Reset” for more specific information.
LED1 LED2
