VI-‐4300
Installation Guide
01A.08
6
33.. PPAARRTT NNAAM
MEESS
①
Fan
The fan and heater (underneath the black panel) are implemented for controlling temperature and mois
ture of the internal device.
②
Reset button
The reset button can be used for restarting the device or resetting it to Factory Default. Refer to
6.3. Re
set
and
6.4. Factory Default
for more details. Reset button is located under PCB.
③
Output configuration switch
Refer to
4.2.Setting the Lens Positions
for more information on the switch
④
Video output, audio and IO terminal connector
A 9-‐pin terminal block is included in the device package. Connect this terminal block into this connector f
or cable connection of video output, audio input/output and digital input/output. Video out is used only
for installation and works for 3 minutes when PAL/NTSC button is pushed.
⑤
LAN connector
RJ45 LAN connector for 10/100 Base-‐T Ethernet.
⑥
Micro SD card slot
Memory card slot for external storage.
⑦
Power Adaptor Connector (DC 12V)
DC12V 3.5A adapter for power supply.
* Models herein and their appearance are subject to change without any prior notice.
