Biometric Readers with swipe capacitive sensor v2.0
7
a
Company
Visual
Corporation
Plus
In idle mode the free tension LED is orange.
When access is granted the free tension LED is Green.
When Access is denied the free tension LED is red.
Orange(Idle Mode): LG- and LR- not connected
Green: LG-(green wire) connected to GND
Red: LR-(orange wire) connected to GND
No light: LG-(green wire) and LR-(orange wire) connected to GND
Refer to Chapter 6 for the connection of the free tension LED, when the reader is connected to EWS controller.
Note:
There are no terminal blocks in EX8 for the free tension LED. When BIOC SW is connected to EX8, the tricolor
triangle LED gives the access status.
2.3
BIOINPROX-SW
Features
Flush Mount biometric reader with integrated proximity
Adjustable Wiegand protocol (8 to 128-bit) is utilized in the biometry reader which makes it compatible with
other controllers with a Wiegand interface
Authentication: Fingerprint or Proximity Cards, Tags and Fobs
Storage capacity: 9000 Fingerprints
1 Free tension LED (Central Alarm)
Configuring the system and Fingerprint enrollment are done through PC, locally or remotely
Enrollment can be also done from a Desktop Reader BioE
Buzzer sound level adjustment through PC
Wiegand Protocol adjustment is done through PC
Separate BioManager Software available free when used with third party controllers
The Fingerprints are stored in the reader and a backup copy is kept in the software
Housing frames in different colours
Blue front illumination can be permanent or switched off
Technical Specifications
Authentication
Finger or Proximity Card
Template capacity
9000
Finger enrollment time
< 1 second for each finger
Recognition and matching time
< 1 second for each finger
Number of templates for each user
1-10 Templates (Fingers)
Free tension LED
yes
Output
Wiegand (8-128bit), default: Wiegand 26bit
Communication
RS485
Power Supply
12Vdc
Consumption
200mA max.
Weight
500g
IP factor
IP 65
Operating temperature
-20
o
C - +50
o
C