manualshive.com logo in svg

visual engineering PAL/NTSC H.264 Encoder, User Manual, Page: 28 / 33

Share
Download
visual engineering PAL/NTSC H.264 Encoder User Manual Download Page 28

December 2016

Visual Engineering

Video solutions. Integrated

visualengineering.co.uk

Page 28

PAL/NTSC H.264 Encoder

Video Panel edge colour - 

in priority order

Meaning

Red

A trigger alarm has occurred.  The duration is set in the settings mode

Blue

This panel is selected for Pan Tilt Zoom Control

No Colour

No trigger alarms & not selected for Pan Tilt Zoom Control

Video Panel Coloured Borders

An example of a Video Panel in Settings mode is 

shown on the right.

Mirror Video: Causes the video image to flip as if 

observed in a mirror.

Flip Video: Inverts the video vertically.

Motion Sensitivity: Allows the user to select sensitivity 

to motion, the default is 95.

Trigger Duration: Sets the duration of the audible 

trigger tone and Video Panel red edged border. The 

default is 5 seconds

The Video panel is edged in a colour, the meaning of which is described in the following table

Video Panel Status Icons

There are a number of status icons that can 

be displayed on the video panel.  

The power icon displays whether the 

encoder is powered from battery or DC 

cable. In the image to the left the camera 

node is battery powered.

If triggers occur, these icons will be displayed 

in red alongside the power status.

Summary of Contents for PAL/NTSC H.264 Encoder


































Reviews:

No comments