2
2. Operating The VQ1100
• Open the battery cover and insert batteries.
Step 1: Slide open the battery door by lifting the tab on the door.
Step 2: Insert three AAA batteries with the polarity as shown:
Step 3: Slide close the battery cover.
•
Press and hold the ON/OFF button for 2 second to start the camera
. The camera will
beep once, indicating that it is ready. The LCD screen will display digits and symbols.
• Aim the camera and compose the scene by looking through the viewfinder.
• Press the shutter button to take a picture.
Buzzer will sound as the confirmation of the
taken picture. LCD will show number of pictures taken.
•
Sleep mode:
With the power ON, if you do not take another picture within 60 sec., camera
will turn to the "Sleep" mode to save batteries. The blank LCD screen identifies the "Sleep"
mode. (Press the ON/OFF button held 2 second can manual turn on/off the "Sleep" mode.)
•
Re-activating
camera from "Sleep" mode. Press the ON/OFF button held 2 second to
re-active the camera for taking next picture.
Please note, that when batteries disconnected or discharged, the memory, and all taken
pictures will be erased.
Power Consumption
• The batteries allow you to take, and store all pictures inside the memory for approximately
two weeks (camera stays in the "Sleep" mode)
• After that, LCD screen starts to blink, informing you that the batteries are low. You must
download the stored pictures into the computer within a day; otherwise all pictures will be
lost.
Summary of Contents for VQ1100
Page 1: ...Quick Start Guide...
