-
5
-
• Installing Camera Batteries
1.Slide open the battery compartment cover
2.Load the batteries and the SD card into the camera.
3.Slide close the battery compartment cover.
• Inserting SD Card:
1. Turn off the camera and open the battery compartment cover.
2. Orient the card as shown. Push the card into the slot to the connector.
3. Firmly to remove the card, push it in, and then release it.
When the card is partially ejected, pull it out.
4. Close the battery compartment cover.
• Turning On the Camera:
1.Press the
ON/OFF
button on as shown in the illustration.
2.Buzzer will beep and indicator lamp will light. The LCD monitor will be
turned on.
3.Press the
ON/OFF
button again to shutdown the camera.
• Taking a Picture
1.Turn on the camera.
2.Slide the
Function
switch to (capture status).
3.Point the camera at the subject, use the monitor screen to
compose the picture.
4.Holding the camera still, gently press the shutter button
to take a picture.
Summary of Contents for VQ-7015
Page 1: ...Quick Start Guide DIGITAL CAMERA VQ7015...
Page 5: ...4...
