17
3.5 Preset Setup
Up to 240 Presets may be programmed. Presets can be recalled
No.
+
PRESET
. Presets are very
powerful and allow you to set the camera parameters and even a motion alarm for each preset.
There are eight pages of Preset menu. Each page has 30 Presets. The pages can be scrolled by
moving the
Joystick
to the NEXT PAGE and
(Tele/Wide)
.
PRESET SETUP
NUMBER : 001
TITLE : ------
CAMERA SET
DWELL : -- SEC
1 2 3 4 5 6 7 8 9 0
- * - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
-
A blank Preset position
*
The Position has a Preset already assigned
!
The current cursor position
NOTE:
Whilst the ‘NUMBER’ field at the top of this screen is adjustable, it does not update/auto
populate the preset position lower down on the screen. So when setting up a preset position
always use
the lower part beneath ‘DWELL’ for this.
Follow steps below to store the Preset positions:
1. Use the
Joystick
to move the cursor to the preset position you wish to add/adjust.
2. After selecting a preset position (blank or already populated), press the
(IO/FN)
key ‘CONTROL’
is displayed. Move to the desired location and zoom position then press the
(IC/FF)
key then
‘CONTROL’ disappears. The Preset for this location is then set.
3. Select ‘TITLE’ – this can be changed one of two ways:
Moving the
Joystick
left and right to select the cursor location and
(Tele/Wide)
to
change the character
Use the
Joystick
to move the cursor to the alpha numeric character table displayed
and select the required character with the
(IO/FN)
keys.
4. Select ‘CAMERA SET’ and move
Joystick
to the right, the ‘PRESET CAMERA SETUP’ menu is
displayed.
PRESET CAMERA SETUP
FOCUS : AUTO
MOTION: OFF
MOTION SETUP
AE SETUP
SAVE AND EXIT(ESC TO CANCEL)
Set FOCUS
AUTO, MANUAL, ONE PUSH - adjust with
(Tele/Wide)
Set MOTION
OFF, ON - adjust with
(Tele/Wide)
