72
5 Maintenance
5.6 Maintenance:
5.6.2
Restart:
The unit is restarted without changing any of the settings. Use
this method if the unit is not behaving as expected.
5.6.3
Reset:
The unit is restarted and most current settings are reset to factory
default values. The settings that are not affected are:
5.6.3.1
the boot protocol (DHCP or static)
5.6.3.2
the static IP address
5.6.3.3
the default router
5.6.3.4
the subnet mask
5.6.3.5
the system time
5.6.4
Default:
The
Default
button should be used with caution. Pressing this will
return all of the network
camera’s settings to the factory default values (including the
IP address).
5.7 Upgrade:
Upgrade your camera by importing an upgrade file and pressing the
Up- grade
button. During the upgrade, do not turn off the power of the network camera. Wait at least
five minutes and then try to access the camera again.
5.8 Backup:
Save the setting values that users have entered to the network camera to a user
PC.
5.9 Restore:
Import and apply a setting value previously saved to a user PC.
NOTE:
Backup and Restore can only be used on the same unit running the same firmware. This
feature is not intended for multi-configurations or for firmware upgrades.
Summary of Contents for VK2 Series
Page 1: ...VK2 PVM27 32CAM User Manual V1 0 VK2 PVM27 32CAM USER MANUAL...
Page 2: ...VK2 PVM27 32CAM User Manual V1 0...
Page 3: ...3...
Page 79: ...NETWORK CAMERA Rev A...