background image

1.2   Key Features  

• Excellent video quality  

The  network  camera  offers  the  highly  efficient  H.265  video  compression,  which  drastically 
reduces bandwidth and storage requirements without compromising image quality. H.264 and 
Motion JPEG is also supported for increased flexibility.  

 

• Quad Streams  

The  network  camera  can  deliver  quad  video  streams  simultaneously  using  H.265/H.264  and 
Motion  JPEG.  This  means  that  several  video  streams  can  be  configured  with  different 
compression formats, resolutions and frame rates for different needs.  

 

• Intelligent video capabilities  

The network camera includes intelligent capabilities such as enhanced video motion detection. 
The network camera’s external inputs and outputs can be connected to devices such as sensors 
and relays, enabling the system to react to alarms and activate lights or open/close doors.  

 

• Improved Security  

The network camera logs all user access, and lists currently connected users. Also, its full frame 
rate video can be provided over HTTPS.  

 

• PoE (Power over Ethernet)  

This network camera can be powered through PoE (IEEE 802.3af), which simplifies installation 
since only one cable is needed for carrying power, as well as video controls.  

 

• ONVIF Certificate  

This is a global interface standard that makes it easier for end users, integrators, consultants, 
and manufacturers to take advantage of the possibilities offered by network video technology. 
ONVIF enables interoperability between different vendor products, increased flexibility, reduced 
cost, and future-proof systems.  

 

• Micro-SD Recording support  

The network camera also supports a Micro-SD memory slot for local recording with removable 
storage of type SDHC and SDXC.  

 

• Audio support  

The network camera also supports two-way audio.  

 

Summary of Contents for VK2-HDX20-SMW













Reviews: