36
∇
Alarm In
This camera provides 1 Alarm In port and user can set the port. The Port can be given as Normally
Open or Normally Close state, and its Normal state can be configured. In order to use the alarm
port, check the “Enable alarm port 1” first.
•
Type:
Choose the type of alarm to use from the drop-down list, NO (Normally Open)
or NC (Normally Closed).
•
Dwell Time:
Set the dwell time an event lasts from the point of detection of an alarm
input.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to clear
all of the information you entered without saving it.
