background image

WARNING 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO 

RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION 

GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. 

 

CAUTION 

 

 

 

 

 

EXPLANATION OF GRAPHICAL SYMBOLS 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert 

the user to the presence of un-

insulated "dangerous voltage" within the product’s enclosure 

that may be of sufficient magnitude to constitute a risk of electric shock. 

 

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the literature 

accompanying the appliance. 

 

PRECAUTIONS 

 

Safety -------------------------------------- Installation ------------------------------- 

 

Should any liquid or solid object fall into the 

cabinet, unplug the unit and have it checked by 

the qualified personnel before operating it any 

further. 

 

Unplug the unit from the wall outlet if it is not 

going to be used for several days or more. To 

disconnect the cord, pull it out by the plug. Never 

pull the cord itself.

 

 

Allow adequate air circulation to prevent internal 

heat build-up. Do not place the unit on surfaces 

(rugs, blankets,

 

etc.) or near materials(curtains, 

draperies) that may block the ventilation holes.

 

Do not install the unit in an extremely hot or 

humid place or in a place subject to excessive 

dust, mechanical vibration. 

The unit is not designed to be waterproof. 

Exposure to rain or water may damage the unit. 

Cleaning --------------------------------- 

Clean the unit with a slightly damp soft cloth. 

Use a mild household detergent. Never use 

strong solvents such as thinner or benzene as 

they might damage the finish of the unit. 

 

Retain the original carton and packing materials 

for safe transport of this unit in the future. 

 

Summary of Contents for VK2-1080MD37PTW
















Reviews: