Vista VK2-1080BXDNe Configuration And User Manual Download

Page: 21 / 96

3.2 Operation

The Network Camera can be used with Windows operating system and browsers. The recommended
browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows.

NOTE:

To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls.

3.2.1 Access from a browser

1. Start a browser (Internet Explorer).
2. Enter the IP address or host name of the Network Camera in the Location/Address

field of your browser.

Default User = admin, default password = admin

4. You will see the following page. Click Live View or Setup to enter web page.

NOTE
For security purposes, be sure to change the password after you log on for the first time.

Summary of Contents for VK2-1080BXDNe

































































































Search results

Summary of Contents for VK2-1080BXDNe

Reviews:

Related manuals for VK2-1080BXDNe

Brands by name

Popular brands

Vista VK2-1080BXDNe, Configuration And User Manual

Search results

Summary of Contents for VK2-1080BXDNe

Reviews:

Related manuals for VK2-1080BXDNe

Brands by name

Popular brands