Vista VK-ENCODER4, Install And User Manual

Page: 32 / 52

23
Event Setup
Alarm inputs can be generated via motion detection or either of the two physical alarm inputs on the
Encoder. These events can be used to control the alarm out options, which include: the Alarm
output port; sending of e-mails; sending of images to FTP servers; and sending domes to preset
positions.
IN-OUT Mapping
When alarms are generated through motion detection the Alarm Out function can be set to send
e-mails to defined users or images to an FTP site
Alarm IN
Alarm IN via either Motion, Alarm in port 1 or Alarm in port 2.
Alarm OUT
Alarm: Closes the Alarm OUT port when the Alarm IN is activated.
E-mail: Sends an email.
FTP: Sends the captured picture to an FTP site.
PRESET: Sends a PTZ dome to a Preset on an alarm event.
□ Enable mandatory alarm out: Enable alarm control to open/close contact.