53
VIPER-H5-49R User manual V1.0
Table 4-27 DEVICE > Display > Sequence > Add Sequence Item and Description
No.
Name
Function
1
Device List
Select the device to connect with satellite.
2
Name
Display the device name.
3
Address
Display the device address
4
Port
Display the device port number.
5
ID
Enter the connected device ID.
6
Password
Enter the connected device password.
7
Change Address Enter the address to change.
Satellite > Setup
Figure 4-27 CAMERA > Satellite > Setup
Table 4-28 CAMERA > Satellite > Setup
No.
Name
Function
1
Satellite
Select device is connected to satellite.
2
Monitor
Select monitor to control with satellite (MAIN1, SUB1).
3
Max View
Display
the connected devices’ screen
16ch if MAIN1 is selected, and 1ch
if SUB1 is selected.
4
Resolution
Select resolution of the device is connected (1920x1080, 3840x2160).
Attention
▪
Check the
monitor’s supported resolution
.
▪
Unless the device connected supports 4K resolution, the screen of the device
connected will not be displayed.
▪
Unless you save the setting, it will return to its original state after a while.
