Vista VIPER H4 Page 13 User Manual Download

Page: 13 / 93

VIPER-H4 user
manual V1.0

2.1

Installing HDD

Note: Hard disk drives are factory fitted.

Attention



Withdraw the mains plug before installing HDD to reduce the risk of injury or
electrical shock, or device malfunction.



Make sure to check the compatibility of HDD with the device.

Always switch off and unplug the unit.

Unscrew with a screw driver (+) and open the unit cover.

Install HDD in the bottom case.

Connect a data cable and power cable with HDD.

Close the cover and tighten screws.

2.2

System boot up

When initially powered up the NVR will display the following icons in order.

Note

Installing new HDD might take more initialize time.

2 When fully booted a buzzer will sound and the live screen will be displayed

3 In

Log in

screen, enter the

Password

and press

Note

Default

& Password

is admin/admin

Attention

Please change password after login due to security.

Summary of Contents for VIPER H4






























































































Search results

Summary of Contents for VIPER H4

Reviews:

Related manuals for VIPER H4

Brands by name

Popular brands

Vista VIPER H4, User Manual

Search results

Summary of Contents for VIPER H4

Reviews:

Related manuals for VIPER H4

Brands by name

Popular brands