Installation & Wiring
1. DC12V Input Terminal: For connected to power supply.
2. Video Output Connector (VIDEO OUT): For connected to video terminal.
Connections
1. Connect to the power cord:
This is to connect camera to a 12V DC regulated power supply.
2. Connect to video input:
This is to connect camera to 75
Ω
video terminal with standard 75-
Ω
coaxial cable
Standard Accessories
1. Main Body * 1
2. DC-BNC Connector * 1
3. Instruction Manual * 1
Vista
Norbain House
Eskdale Road
Winnersh Triangle
WOKINGHAM
Berkshire
RG41 5TS
Tel: +44 (0) 118 944 0123
Fax: +44 (0) 118 944 0999
www.vista-cctv.com
1. Please use correct power adaptor, DC12V (regulated), to operate this unit. The power
tolerance of this unit is DC 12V
±
10% (DC10.8V~13.2V), over maximum DC13.2V power
input will damage this unit.
2.
Video output (BNC connector) of this unit can be only connected to monitor. Please
check the wiring of video output before power on. If the power is offered through video
output, the unit will be damaged.
3.
Warning:
To prevent fire or electric shock hazard, do not expose this application to rain or
moisture
CAUTION
