Vista VBC400-600 Installation And User Manual Download Page 2

 
Before You Begin 

Read these instructions before installing or operating this product. 

Note:

 This installation should be made by a qualified service person and should 

conform to local codes. 
This manual provides installation and operation information.  To use this document, you 
must have the following minimum qualifications: 

  A basic knowledge of CCTV systems and components 

  A basic knowledge of electrical wiring and low-voltage electrical connections 

Intended use 

Only use this product for its designated purpose; refer to the product specification and 
user documentation. 

Customer Support 

For assistance in installing, operating, maintaining and troubleshooting this product refer 
to this document and any other documentation provided.  If you still have questions, 
please contact Norbain Technical Support and Sales: 

Norbain Ltd 

210 Wharfedale Road, IQ Winnersh, Wokingham, Berks, RG41 5TP, 

United Kingdom. UK +44 (0) 118 912 5000  

Ned31 (0) 76 579 2577 / B32 (0) 3 369 8080  

South 27 (0) 11 887 1546 / P351 234 301900 

Note:

 You should be at the equipment and ready with details before calling Technical 

Support. 
 

Conventions Used in this Manual 

Boldface

 or button icons highlight command entries.  The following 

WARNING,

 

CAUTION

 and 

Note

 statements identify potential hazards that can occur if the 

equipment is not handled properly:

 

 

WARNING:  

 

Improper use of this equipment can cause severe bodily injury or 
equipment damage. 

 

** Caution:  

 

Improper use of this equipment can cause equipment damage. 

Note:

 Notes contain important information about a product or procedure. 

Summary of Contents for VBC400-600













Reviews: