For more in depth motorization programming instructions, please visit vistaproducts.com/guides
7/19
K2190
6 CHANNEL TIMER REMOTE
|
Simplicity
Rechargeable Motorization
Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
2. Mount the shade.
3. Your shade is now ready!
Press the AUTO/MANUAL button until the display
shows ‘Manual’. Select the programmed channel and
use the UP and DOWN arrows to operate the shade.
Setting Time and Day
Make sure the remote is in ‘Manual’ mode. Press the AUTO/MANUAL button until ‘Manual’ appears on the screen.
1. Push and hold the LIMIT button.
While holding the limit button, push the
AUTO/MANUAL button for 3 seconds
and release. The hour digits will flash.
2. Use the UP and DOWN buttons to set the
current hour. Press the CHANNEL button to
confirm hour and advance to minutes.
NOTE
: Time is in 24 hour format.
3. Repeat step 2 for minutes and day.
Once time and day are set, hold the AUTO/
MANUAL button for 3 seconds. Display will
flash and then display current time and day.
1. Connect the motor and battery
in the headrail (as shown).
Connect
