Connections and indicators:
Note:
1. Device must be connected with lightning protection grounding, otherwise the
protection will be reduced. Use a 20 gauge or larger wire to connect the grounding
terminal.
2. To enter surveillance mode, down power the switch, slide the switch to the left
and the repower. The LED will then be illuminated green.
Installation steps
:
Please check the following items before installation, if any are missing, please
contact your dealer
1 x 8 port PoE ethernet switch
1 x power adaptor
1 x power cable
1 x accessory pack
1 x user manual
1) Ensure power is turned off to switch
2) Use network cable connect PoE IP camera to the 8 PoE ports
3) Use a network cable connect the uplink ports to NVR or computer;
4) Connect power adapter;
5) Check if the installation is correct, equipment is in good condition, the
connections are stable, turn power on to the system.
6) Ensure all equipment is working correctly.
Specification:
Power
Power Supply
Encapsulated PSU adaptor
Voltage range
48~54VDC
Consumption
<5W
PoE budget
120 W ( 8x15W, 4x30W, 2x30W + 4x15W etc)
Ethernet
Speed
1-8 port: 10/100Mbps
CCTV: 10Mbps
UPLINK: 1000Mbps
Transmission
distance
1-8 port: 0
～
100m
CCTV: 0~250m
UPLINK: 100m
Network Switch
Ethernet Standard
IEEE 802.3 , 802.3u , 802.3af/at
Backplane
Bandwidth
7.0G
Packet Forwarding
Rate
4.166Mbps
Packet Buffer
1.5Mb
MAC
4K
Status Indicator
Power LED
1 (red)
Ethernet Port LED
2 (yellow & green) on RJ45: yellow indicates
PoE, green indicates Link/Act
Surveillance Mode
LED
1 (green - indicates CCTV mode on)
Protection Level
Pulse Group
Level 2
Standard: IEC61000-4-4
ESD
1a Contact Discharge Level 3
1b Air Discharge Level 3
Standard: IEC61000-4-2
Lightning protection
6KV
Standard: IEC61000-4-5
Working
Environment
Working
Temperature
-10
0
C~55
0
C
Storage
Temperature
-40
0
C~85
0
C
Humidity
(Non-condensing)
0~95%
Mechanical
Outer casing
Galvanised steel
Dimensions
200mm×101.2mm×27mm
Colour
Black
Weight
500g
Power/Distance
(54VDC)
Distance
100m
150m
200m
250m
Power
26W
24W
23W
21W
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.”
