Vista P4-S(E), Manual, Page: 5 / 11

www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
P4-S Pendant UCCNC Manual v. 1.0
FUNCTIONS and OPERATIONS
1. Axis selection
1.1
Press X/A, Y/B or Z/C axis selection button to select an axis. X axis and A axis, Y axis and B
axis, or Z axis and C axis share the same button. Press the button again to select A, B or C axis.
□
Selected axis name. It flashes at ½ second rate.
□
Step size and Step jogging rate. The size and rate display changes alternately every 2 seconds.
2. MPG (Manual Pulse Generator) mode selection
2.1 STEP, STEP SIZE and STEP JOG RATE
2.1.1
STEP
In STEP mode, the selected axis moves 1 step at each MPG click (detent) with the
step size currently in the system and with speed of step jogging rate.
2.1.2
STEP SIZE
While pressing and holding the EN side Button , turn MPG one or few
clicks clockwise or counterclockwise to select predefined step size.