www.vistacnc.com
- 4 -
www.vistacnc.com
- 4 -
P1A-S Pendant UCCNC Manual v. 1.0
PLUGIN and FW
Download the latest UCCNC P1A-S Plugin package from
download page and
unzip the package.
The package includes following files:
1.
This manual
2.
P1ASpendant.dll --- P1A-S pendant UCCNC plugin file
3.
Pendant FW update procedure --- for pendant firmware upgrade
4.
Pendant FW Loader --- tools for FW upgrade
5.
P1AS_UCCNC_FW_v --- FW for UCCNC
Move the plugin file into UCCNC Plugins directory.
Refer to “iMach3 Pendant FW update procedure” to upgrade the pendant firmware (FW) to UCCNC if
the pendant was preinstalled or used with other CNC application, or a newer FW version is available.
CONNECTION and START
Directly plug the USB cable into any USB port on the PC.
Start UCCNC application.
Click CONFIGURATION and GENERAL SETTINGS, select Configure plugins, and check
Enable on P1A-S Control Pendant.
Close and restart UCCNC application.
->
->
