Quick Installation Guide
VK2-1080BIR35V16e Quick guide V1.0
10
3.6 Resetting to the factory default settings
To reset the VK2-1080BIR35V16e to the original factory settings, go to the Setup>System
>Maintenance
web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the
Reset button on the network camera, as described below:
Follow the instructions below to reset the VK2-1080BIR35V16e to the factory default settings using the
Reset button.
1. Switch off the VK2-1080BIR35V16e by disconnecting the power adapter.
2. Remove the front cap of the camera.
3. Press and hold the Reset button while reconnecting the power.
3. Keep the Reset button pressed during about 2 seconds or more than.
4. Release the Reset button.
5. The VK2-1080BIR35V16e resets to factory defaults and restarts after completing the factory
reset.
The unit now has the default IP address 192.168.30.220.
6.
Close the front cap of the camera.
Caution:
When performing a Factory Reset, you will lose any settings you have saved.
3.7 More Information
For more information, please see the VK2-1080BIR35V16e
User’s Manual, which is available on the
CD included in this package.
