a. Clicking button 'Full Auto' on the main interface of recorder; and the recorder send the full auto commands(as
you filled) to camera auto-tracking controller(VIS-DCP2000), and receiving the codes, the camera auto-tracking
controller start to control the camera to tracking the positions.
clicking button 'Manual' on the main interface of recorder; and the recorder send the stop tracking commands(as
you filled) to camera auto-tracking controller(VIS-DCP2000), and receiving the codes, the camera auto-tracking
controller stop tracking the positions.
c. Clicking button 'Semi Auto' on the main interface of recorder; and the recorder send the semi auto
commands(as you filled) to camera auto-tracking controller(VIS-DCP2000), and the recorder will not response
and execute any commands from camera auto-tracking controller(VIS-DCP2000);the camera auto-tracking
controller(VIS-DCP2000)is still working and control the camera to tracking the position. The user can switch the
input channel video to PGM by manual.
④
A1~A5
(HDMII-1~HDMI-5according to models),the commands filled should be corresponding the
camera auto-tracking controller commands, and the HDMI1~5 port should be connected as the
commands. For example, we need to switch to HDMI1 for tracking the president position, and then the
camera controller should send the command(switching the HDMI1 to PGM) to recorders unit and the
delay time is default as 0s.You also can set the delay according to your camera specification.
4.State Strategy Introduction--Only apply to the classroom application.
Summary of Contents for VIS-CRS02-A
