manualshive.com logo in svg

Vissani 1007086601, Use And Care Manual, Page: 5 / 22

Share
Download
Vissani 1007086601 Use And Care Manual Download Page 5

 

5 HOMEDEPOT.COM

 

 

Please contact 1-877-527-0313 for further assistance.

Pre-Installation (continued)

ELECTRICAL REQUIREMENTS

WARNING:

 

□

Plug into a grounded 3-prong outlet.

 

□

Do not remove ground prong.

 

□

Do not use an adapter.

 

□

Do not use an extension cord.

 

□

Failure to follow these instructions can result in death, fire, or electrical shock.

Recommended Grounding Method

This portable air conditioner must be grounded. This portable air conditioner is equipped with a power supply cord with a three-prong 
grounding plug. The cord must be plugged into a properly grounded three-prong outlet, grounded in accordance with all local codes and 
ordinances. If a properly grounded outlet is not available, it is the customer’s responsibility to have a properly grounded three-prong outlet 
installed by a qualified electrician.

Customer’s Responsibility

 

□

To contact a qualified electrician.

 

□

To assure that the electrical installation is adequate and conforms to the national electrical code, ANSI/NFPA 70-last edition, and all 
local codes and ordinances.

Copies of the standards listed may be obtained from: 
National Fire Protection Association 
1 Batterymarch Park 
Quincy, MA 02169-7471

www.nfpa.org

Wiring Requirement

Power supply

Model

Time-delay fuse (or circuit breaker) 

115V 
103.5V min. 
126.5V max.

5KBTU

10A

6KBTU

13A

Power Supply Cord

NOTE:

 Your air conditioner’s device may differ from the one shown. This room air conditioner is equipped with a power supply cord required 

by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect 
leakage current and power will be disconnected in a fraction of a second.

To test your power supply cord:

1.  Plug power supply cord into a grounded 3-prong outlet.

2.  Press RESET (2) (on some devices, a green light will turn on).

3.  Press TEST (1) and listen for click. The RESET button will trip, and on some devices, a 

green light will turn off.

4.  Press and release RESET (2) and listen for click. The RESET button will latch, and on 

some devices, a green light will turn on. The power supply cord is ready for operation.

NOTE:

 

□

The RESET button must be pushed in for proper operation.

 

□

The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.

 

□

Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.

 

□

A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be 
repaired.

 

□

The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

1

2

Summary of Contents for 1007086601























Reviews:

No comments